正常來說，無錫環氧地坪施工漆面層是光滑平整、整體無縫的，非常的美觀。但是，有一些消費者在施工環氧地坪漆的時候會遇到面漆層存在氣泡的問題，如果是個別氣泡還好，若是大面積出現氣泡問題就會影響整體環氧地坪工程的美觀。那么對于環氧地坪漆面漆層氣泡問題怎么解決呢?環氧地坪漆面漆層氣泡產生原因：

Normally, the epoxy floor coating is smooth, smooth, seamless and very beautiful. However, some consumers in the construction of epoxy floor paint will encounter the problem of air bubbles in the topcoat. If it is individual air bubbles, it will affect the overall aesthetics of the epoxy floor project if there is air bubbles in a large area. So how to solve the problem of bubbles in epoxy floor paint? The causes of bubbles in epoxy floor paint are as follows: 

1、基層地面沒有做好防潮措施，基面含水率大于12%。

1. There is no good moistureproof measures on the base surface, and the moisture content of the base surface is more than 12%.

2、施工人員技術不夠熟練，施工時環氧地坪漆操作流程不規范;

2. The technicians are not skilled enough and the operation process of epoxy floor paint is not standardized.

3、進行環氧地坪漆施工時環境溫度不適宜。

3. The ambient temperature is not suitable for the construction of epoxy floor paint.

環氧環氧地坪氣泡問題預防方法：

Preventive methods for bubble problems in epoxy floors:

1、必須做好基礎素地封閉再做面漆層，尤其是水磨石、低強度水泥砂漿等氣孔比較多的地面;

1. We must do a good job of sealing the basic ground and then making the topcoat, especially the ground with more air holes such as terrazzo and low strength cement mortar.

2、在施工面漆層時，施工速度不宜太快，回刀時一定要到位;

2. In the construction of topcoat, the construction speed should not be too fast, and must be in place when the knife is returned.

3、對于厚涂型環氧地坪(如環氧自流平地坪)，可以在刮完面漆后，用消泡滾筒滾一遍，幫助氣泡消平。

3. For thick-coated floors (e.g. epoxy self-leveling floors), after scraping the finish paint, the defoaming drum can be used once to help defoam the floors.