環氧地坪漆在施工前首先要確認地面情況，無錫環氧地坪在施工中應保持一個潔凈的環境，如果地面凹凸不平，有舊油漆，存在疏松層等，就直接影響環氧地坪整體的施工效果，所以要先將地面充分磨平，這樣可以減少用漆量，增加附著力，使漆膜不易破壞，并使整體效果看上去更平整、美觀。光磊環氧地坪漆廠家針對環氧地坪并對新建水泥地坪上面的水泥塊，灰粉起到很好的去除作用，能有效地打開水泥毛孔，以便環氧底漆更好地滲透滲出與吸收，環氧地坪漆工程的質量起到至關重要的作用。

Before construction, epoxy floor paint should first confirm the ground condition. In construction, epoxy floor should maintain a clean environment. If the ground is uneven, there are old paints, and there are loose layers, it will directly affect the overall construction effect of the floor. Therefore, the ground should be fully ground first, so as to reduce the amount of paint used, increase adhesion, make the film not easy to damage, and make the overall effect. It looks smoother and more beautiful. Guanglei Floor Paint Factory aims at epoxy flooring and removes cement blocks and powders on new cement flooring. It can effectively open cement pore, so that epoxy primer can penetrate and absorb better. The quality of epoxy floor paint project plays a vital role. 

所以用專用研磨機對水泥或混凝土地面進行打磨是環氧地坪漆施工工藝中非常重要的一步，以去除其表面的浮漿層，并使基層表面達到要求的粗糙度即可。目的是增強涂層材料與基層的粘結力。具體打磨厚度沒有要求，看基層的原先質量。

So it is a very important step in the construction technology of epoxy floor paint to use special grinder to grind the cement or concrete floor, so as to remove the slurry layer on the surface and make the surface of the base meet the required roughness. The purpose is to enhance the bonding force between the coating material and the substrate. Specific grinding thickness is not required, depending on the original quality of the grass-roots.

地面打磨最主要的作用是把地面雜物等清除干凈，混凝土毛細孔，有利于環氧地坪漆底漆更容易滲透混凝土地面，粘結得更牢固。而且打磨前地面是亞光而且有灰塵，而做完環氧地坪漆之后，地面很干凈，而且返光，原有地面的不平整缺陷顯露無疑，所以大家在地坪漆施工前一定要和業主說明白這一點。

The most important function of ground polishing is to clean up the ground debris, concrete capillary holes, which is conducive to the epoxy floor paint primer more easily penetrate the concrete floor and bond more firmly. And the ground before polishing is Matt and dusty, and after finishing the epoxy floor paint, the ground is very clean, and the return light, the original ground irregularity defects are undoubtedly exposed, so we must explain this to the owners before the construction of the floor paint.

地坪漆施工地面打磨的方法有以下三種：

There are three methods of ground polishing for floor paint construction:

干打磨法：用砂紙、乳石、細的石粉進行打磨，然后打掃干凈，此法適用于干硬而脆或裝飾性要求不太高的地坪漆表面。干打磨的缺點是操作過程中容易產生很多粉塵，影響環境衛生。

Dry polishing method: grinding with sandpaper, milky stone and fine stone powder, and then cleaning. This method is suitable for hard and crisp or decorative floor paint surface. The disadvantage of dry grinding is that it is easy to produce a lot of dust during operation, which affects environmental hygiene.

濕打磨法：用水砂紙蘸水或肥皂水打磨。水磨能減少磨痕，提高涂層的平滑度，并且省砂紙、省力。但水磨后應注意噴涂下層油漆時，一是要等水磨層完全干透后才能涂下層油漆，否則漆層很容易泛白。另吸水性很強的底材也不宜水磨。濕打磨法比干打磨質量好。但是環氧地坪漆施工中都用干打磨法，因為環氧地坪漆施工是裝修工程中最后一環，所以工期較短，如果用濕打磨法打磨完，還要等地面徹底干燥，而且如果地面干燥時間不夠，環氧地坪漆很有可能會起泡，脫層。

Wet grinding method: grinding with sand paper dipped in water or soapy water. Water milling can reduce wear marks, improve the smoothness of coatings, and save sandpaper and labor. But after water grinding, attention should be paid to spraying the lower layer of paint. First, it is necessary to wait until the water grinding layer is completely dry before applying the lower layer of paint. Otherwise, the paint layer will easily become white. In addition, the substrate with strong water absorption is not suitable for water grinding. Wet grinding is better than dry grinding. But in the construction of epoxy floor paint, dry polishing method is used. Because the construction of epoxy floor paint is the last link in decoration project, the construction period is shorter. If the ground is polished by wet polishing method, the ground will be completely dry. Moreover, if the ground is not dry enough, the epoxy floor paint is likely to foam and delaminate.

機械打磨法：比手工打磨法的生產效率高。一般采用電動打磨機或在抹有磨光膏的電動磨光機上進行操作。打磨時應注意：地坪漆涂層表面完全干燥方可進行;打磨時用力要均勻;濕打磨后須用清水洗凈，然后干燥;打磨后不能有肉眼可見的大量露底現象。

Mechanical grinding method: higher production efficiency than manual grinding method. Generally, it is operated by an electric polishing machine or an electric polishing machine with polishing paste. When polishing, attention should be paid to: the surface of floor paint coating is completely dry before it can be carried out; the force should be uniform when polishing; after wet polishing, it must be washed with clean water and then dried; after polishing, there can not be a large number of naked-eye bottom phenomenon.