環氧地坪施工過程中有很多因素會影響環氧地坪施工效果，環氧地坪施工過程中比較常見的環氧地坪漆起泡、環氧地坪漆沒有光澤，可能在環氧地坪漆施工過程時施工不當造成的，所以應嚴格按照環氧地坪施工標準來進行施工，避免出現以上問題。

There are many factors affecting the construction effect of epoxy flooring. Foaming and gloss of epoxy flooring paint are common in the construction process of epoxy flooring paint, which may be caused by improper construction during the construction process of epoxy flooring paint. Therefore, construction should be carried out strictly in accordance with the construction standard of epoxy flooring to avoid them. Avoid the above problems.

一、環氧地坪漆起泡問題

I. Foaming of Epoxy Floor Paint

環氧環氧地坪漆起泡的原因可以能有以下幾點：1、基層地面含水率過高；2、基礎地面處理不干凈；3、溫度太高，造成環氧地坪漆粘結力降低。所以要防止環氧地坪漆起泡問題，環氧地坪施工中應杜絕以下三點水、灰塵、暴曬。

The reasons for the foaming of epoxy floor paint can be as follows: 1. the moisture content of the base floor is too high; 2. the treatment of the base floor is not clean; 3. the temperature is too high, resulting in the decrease of the adhesive force of the epoxy floor paint. Therefore, in order to prevent foaming of epoxy floor paint, the following three points of water, dust and sun exposure should be eliminated in the construction of epoxy floor paint.

二、環氧地坪漆沒有光澤

2. Epoxy floor paint has no gloss

首先施工前應將基礎地面處理干凈并且打磨細致，其次，環氧地坪漆施工時濕氣大會使地坪漆發白變質，所以環氧地坪施工應盡量選在晴朗的天氣，當然選擇優質的環氧地坪漆材料廠家是保證環氧地坪施工質量的關鍵，好材料才能施工出好的環氧地坪。

First of all, the foundation ground should be cleaned and polished carefully before construction. Secondly, the moisture during the construction of epoxy floor paint will make the floor paint white and deteriorate. Therefore, the construction of epoxy floor paint should be in sunny weather as far as possible. Of course, the selection of high-quality epoxy floor paint material manufacturers is the key to ensure the construction quality of epoxy floor paint. Only in this way can a good epoxy floor be constructed.